Kaelus IPA-703A KIT1

The Kaelus iPA-703A is a battery portable passive intermodulation analyser for the APT700 LTE band.

PIM faults degrade uplink sensitivity without appearing on a return loss sweep, so a dedicated analyser is the only reliable way to certify an antenna system before handover. Kaelus pioneered the first commercial PIM analyser and its testers are approved for work across all major Australian mobile networks.

Band coverage: transmit at 758 to 768 MHz and 778 to 803 MHz, receive at 703 to 748 MHz.

Shared series specification: transmit carrier power of 0.1 to 20 W, adjustable from +20 to +43 dBm in 1 dB increments; residual PIM below -117 dBm/-160 dBc maximum and typically below -125 dBm/-168 dBc at two 20 W carriers; 3rd, 5th and 7th order intermodulation products measured through a 7-16 DIN female RF output; 12 kg; removable 25.2 VDC, 3.45 Ah, 87 Wh lithium-ion battery packs.

Measurement modes: PIM over frequency, PIM over time, and spectrum monitoring.

Supplied in an R92-0445 hard transit case with: iPA-703A analyser, CIS-0001A calibration intermodulation source, PIL-0005A dual gender low PIM load rated 10 W average, R18-0448 low IM cable with 7/16 male to 7/16 male terminations, R29-1518 adjustable shifter, R29-1851 torque wrench, two battery sub-assemblies, and an R92-0443 docking station.

This information is provided as a general guide only. It is not a substitute for site-specific procedures or the judgement of a competent RF technician.

TMG operates a NATA-accredited calibration laboratory in Clayton South, Victoria. Contact us on 1800 680 680, option 4, to confirm availability and hire periods.